Department of Chemical Engineering

Event type: Technical
Participation: Max 3 per Team, Any department 
Platform: Zoom
No. of Rounds: 1
Date/Time: Jan 22nd & 23rd, 9am to 11am

RULES: 
- Abstracts are mandatory.
- Pre-recorded power point presentation (voice over included) not exceeding 10 minutes is mandatory.
- Audio should be muted and video to be kept on for the entire session.
- All the participants must join 10 minutes before the stipulated time.
- Video and audio must be kept on during the presentation and question and answer time (mandatory).
- All the abstracts and pre-recorded PPTs must be sent to the given mail id: invente.synergy.op@gmail.com. Last date for submitting the entries is Jan 15, 6 pm (For extension, contact us). 
- 10 minutes for the presentation and 5 minutes for the question and answer time. Hence 15 minutes allotted per team.
- All registered participants must be present throughout the session.
- Link for zoom meeting will be sent prior to the event to the respective mail ids. 
- Every participant is required to ensure stable internet connectivity for the entire session. If any issues must login using the same link again.
- Participants must login with the following format
[OP-Team Number-Name]. 

Thrust areas: 
- Wastewater treatment
- Environmental engineering
- Material technology
- Nano technology
- Process optimization
- Biochemical and Biotechnology
- Fuels and Chemicals
- Separation
- Pollution abatement/Waste management 

Event type:  Technical
Participation: Team of 2-3, Chemical department
Platform: Zoom
No. of Rounds: 2
Date/Time: Jan 22nd, 11am to 12pm

Round 1
- Participants will receive the zoom link well in advance before the round starts to their respective Mail ID.
- Participants should join the zoom platform with the video ON and audio OFF.
- The Participants will be separated into teams and each team will be sent into separate breakout rooms.
- There will be 3 volunteers who will be there to see if anyone is engaged in any kind of foul play.
- For this round, a Google Form will be shared in the zoom chat section. It consists of 10 questions, which needs to be answered in 15 minutes.
- The Team should find out the common word connecting the two pictures given and give the correct chemical engineering technical word.
- Participants need to submit the Google form within 15 minutes after which it won’t accept responses.
- There should be only one submission per team (i.e.) only one Google form must be submitted per team.
- Each correct answer fetches you 10 points and no negative marking. There will also be special starred questions within the 10 questions which will be considered if there is a tie. 
- HAPPY CONNECTING 
- The top 'n' teams (depending upon how many teams register) with the highest score will be shortlisted for the final round.
- Zoom link for the shortlisted teams will be shared to their registered Mail ID. 

(Duration: 25min)

Round 2
Shortlisted teams must join the zoom with the video ON and audio OFF.
- Volunteers will be present to see if they are indulging in any kind of malpractices.
- Each Team will be given with separate breakout rooms.
- Through screen sharing, the questions will be shared by event coordinators.
- Each question will consist of five clues with which the participants must try to find the apt chemical engineering word.
- Participants can send their answers through private message on zoom chat.
- The team which answers the first only will be given points.
- There will be a total of 5 questions with 5 clues for each question.
- Each clue will be displayed for a duration of 15 seconds.
- The Team which finds the word in 1st clue will be given 50 points, if found in 2nd clue will be given 40 points, in 3rd clue with 30 points and so on.
- There will be negative marking of -10 points where if the team attempts to answer the question but fails to do so in the 1st clue.
- If the same team answers that question in the 4th, 3rd or lower clues (the points would be for ex: 30-10=20 points)
- Winner will be selected based on which team has the highest of points at the end of five questions.
- If there is a tie there will be a tie breaker question. 

(Duration: 20min)

Event type:  Technical
Participation: Max 2 per Team, Chemical department
Platform: Zoom
No. of Rounds: 2
Date/Time: Jan 22nd, 1pm to 2pm

Round 1
- Participants will receive the zoom link well in advance before the round starts to their respective Mail ID.
- Participants should join the zoom platform with the video ON and audio OFF.
- There will be 3 volunteers who will be there to see if anyone is engaged in any kind of foul play.
- For this round, a Google Form will be shared in the zoom chat section.
- It consists of 30 questions, which needs to be answered in 15 minutes.
- Each question will consist of four options of which the participant must choose the odd one out.
- Participants need to submit the Google form within 15 minutes after which it won’t accept responses.
- There should be only one submission per team (i.e) only one Google form must be submitted per team.
- Each question carries one mark and no negative marking.
- Some starred questions will be there, which will be considered if there is a tie.
- The top 'n' teams (depending upon how many teams register) with the highest score will be shortlisted for the final round.
- Zoom link for the shortlisted teams will be shared to their registered Mail ID.


(Duration: 20-25min)

Round 2
- Shortlisted teams must join the zoom with the video ON and audio OFF.
- Volunteers will be present to see if they are indulging in any kind of malpractices.
- Through screen sharing, the questions will be shared by event coordinators.
- Each question will consist of four options of which the participant must choose the odd one out.
- Participants can send their answers through private message on zoom chat.
- There will be a total of 15 questions and for each question 40 seconds will be allotted to answer them.
- Each question carries one mark and no negative marking.
- Starred questions will be considered in case of a tie.
- Winner will be selected based on which team answers correctly first.

(Duration: 20min)

Event type:  Only Chemical engineering and allied branches
Participation: Teams of 2, Any department
Platform: Zoom
No. of Rounds: 2
Date/Time: Jan 23rd, 3pm to 4pm

Round 1
- Participants will receive the zoom link well in advance before the round starts to their respective Mail ID.
- Participants should join the zoom platform with the video ON and audio OFF.
- There will be 3 volunteers who will be there to see if anyone is engaged in any kind of foul play.
- For this round, a Google Form will be shared in the zoom chat section.
- It consists of 30 questions, which needs to be answered in 15 minutes.
- Each question will consist of four options of which the participant must choose the odd one out.
- Participants need to submit the Google form within 15 minutes after which it won’t accept responses.
- There should be only one submission per team (i.e) only one Google form must be submitted per team.
- Each question carries one mark and no negative marking.
- Some starred questions will be there, which will be considered if there is a tie.
- The top 'n' teams (depending upon how many teams register) with the highest score will be shortlisted for the final round.
- Zoom link for the shortlisted teams will be shared to their registered Mail ID.


(Duration: 20-25min)

Round 2
- Shortlisted teams must join the zoom with their video “ON” and audio “OFF”.
- Volunteers will be present to see if the participants are indulging in any kind of malpractices.
- For this round, a Google Form will be shared in the zoom chat section.
- There will be a total of 15 questions, which are supposed to be answered in 10 minutes.
- Each question will consist of four options, out of which the participant must choose one.
- Participants need to submit their Google form within 10 minutes. Forms submitted after that will not be accepted.
- There should be only one submission per team (i.e., only one Google form must be submitted per team.)
- Each question carries one mark and no negative marking.
- Winner will be selected based on the marks.
- In case of tie, winner will be selected based on which team submitted the response first. 

(Duration: 15min)

Event type:  Technical
Participation: Individual, Chemical department
Platform: Zoom
No. of Rounds: 2
Date/Time: Jan 22nd, 2pm to 4pm

Round 1
- The meeting link will be sent to the participants in advance to their registered mail IDs.
- Participants are required to join the meeting with their video and audio OFF.
- The hosts and co-hosts will ask the participants to unmute whenever necessary.
- The prelims require the participants to express their insights on the topic assigned to them, with individual speaker time not exceeding 5 minutes.
- The topics are: 
1. Waste management
2. Production process modification
3. EVOP methodology 
4. Biomass conversion techniques
5. Carbon sequestration 
- The finalists will be selected at the discretion of the jury panel, with important criteria being knowledge, flow and accuracy of the data used.
- Participants are requested to stay civil.
- Irrespective of the number of participants, SIX participants will be selected for the final round. 

(Duration: 60min)

Round 2
- Participants will be informed of the topic and their affiliation before the final round commences.
- The final round will have two segments.
- The first segment will be a constructive debate session with individual speaker time not exceeding 3 min.
- The second segment will be an interactive session that requires the participant to answer questions from the jury panel and other participants- individual participant time not exceeding 7 min.
- 3 prizes will be given: 2 based on the performance in the final round and 1 based on overall consistency.
- Participants are requested to be punctual.

(Duration: 60min)

Event type:  Technical
Participation: Individual, Only Chemical engineering and allied branches
Platform: Zoom
No. of Rounds: 1-2
Date/Time: Jan 23rd, 1pm to 3pm

Round 1
- All the participants will be provided with the zoom link to their registered email ID, in which the general instructions about the event will be provided.
- The video should be turned on during the entire event and the audio should be turned on when it’s their turn to speak.
- Each member will be assigned with different chemical engineering industrial roles respectively (E.g. Process engineer, design engineer, cost engineer etc.) and an industrial problem to solve. 
- A brief description about the role would be explained before the commencement of the event.
- Each participant would be given 5 minutes to prepare, to provide valid solutions according to their assigned roles, to the given industrial problem.

(Duration: 5-10min)

Judging Criteria
- Spontaneity in providing insights related to the role assigned.
- Significant core knowledge. 
- Valid arguments to address the given problem.
- To be able to provide suitable response to the questions posed by the panel.
- Creativity and out of the box thinking will be suitably noted.

Domain of Industry:
- Petroleum & petrochemical industry.
- Paper and pulp industry.
- Pharmaceutical industry.

Event type: Non Technical
Participation: Individual, Any department
Platform: Instagram
No. of Rounds: 1
Date/Time: Jan 22nd, 12pm to 1pm

- Participants will be asked to register in the given link (Google form).
- Registered participants must mail their photographs to invente.synergy.shutterup@gmail.com in the following accepted formats: .jpg, .jpeg, and .tiff.
- ONLY ONE submission per participant is allowed.
- The photograph must not have any obscene content.
- The photograph must not represent any particular individual, organization or brand name and must not depict any religious theme.
- Last date for submitting the entries is January 15th, 6:00 pm, 2021.
- Winners are decided based on the calculated number of likes, shares and comments.
Submissions that do not abide with the rules will NOT be accepted and registration fee will not be refunded. 

Event type: Non Technical
Participation: Individual, Any department
Platform: Instagram
No. of Rounds: 1
Date/Time: Jan 23rd, 12pm to 1pm

- Participants have to send their memes to invente.synergy.mb@gmail.com
- Only one meme per participant will be considered valid.
- The image aspect ratio should be in the standard 1:1 Instagram format.
- Memes should not display any forms of obscene content.
- The event winner will be selected based on the number of likes their meme has garnered in the Instagram page.
- The last date for receiving memes is January (tentative)
Submissions that do not abide with the rules will NOT be accepted and registration fee will not be refunded. 

Event type: Non Technical
Participation: Individual, Any department
Platform: Instagram
No. of Rounds: 1
Date/Time: Jan 22nd, 12pm to 1pm

- Participants will be asked to register in the link given below (Google form)
- Registered participants must mail their one-minute video invente.synergy.th@gmail.com 
- ONLY ONE submission per participant is allowed.
- Video can contain any kind of talent such as dancing, singing, instrumentals, mimicry, illustrations etc.,
- The video must not have any obscene content.
- The video must not represent any particular individual, organization or brand name and must not depict any religious theme.
- The video must be less than or equal to ONE MINUTE only Videos like dubsmash, tiktok, reels, josh etc., are NOT accepted.
- Last date for submitting the entries is January 15th, 6:00 pm, 2021. 
- Winners are decided based on the calculated number of likes, shares and comments.
Submissions that do not abide with the rules will NOT be accepted and registration fee will not be refunded.